May Ride of the Month Nominations

[Hemicota]

It's that time again.. Time for Ride of the month nominations.

Please submit at least 3 pictures of the ride you're nominating along with the person's name and vehicle make, model, and year.

Nominations will last one week. Next Friday at midnight, we'll go straight in to poll voting to choose the winner.

....and here we go!

Congrats again to last month's winner, Carlos Diaz and his super clean 1991 Toyota MR2.

[Barryh24]

Owner:  Barry Hall

2003 Cobra Convertible, Torch Red w/Black top, 25k miles

The car makes 656RWHP 555lb foot @ 17lbs of boost on pump gas (93 Octane)

Engine/Drivetrain/Fuel Delivery:

Polished Whipple Super Charger, Whipple 3.5 upper pulley, Metco 4 lower pulley, Accufab SB/TB, Ford Racing 80# injectors, SCT BA3000, LFP heat exchanger, METCO 90mm idler, METCO tensioner, Fore Innovations Stage 1 Fuel System, Kenne Bell boost-a-pump, Brembo Slotted Rotors, Hawk high performance ceramic pads, Morroso SC coolant tank, Canton Coolant Expansion Tank, "TERMINATOR" Radiator Support, Ford Racing Coil Covers, Metco Valve Cover Breathers, Redline hood struts, 26 spline input shaft, Spec Stage 3+, Koni Adjustable Shocks and struts, Kooks long tube headers, JLT RAI, BBK OffRoad H Pipe, Flowmaster 40's, SCT Livewire, IRS brace, Maximum Motorsports full length sub frame connectors

Exterior:

The attached pics show two different sets, both of which are listed below.  It currently has the FR500's on it.

18" AFS replicas/18" Chrome FR500's w/315/30/18 Toyo Proxes R888 out back, Eibach Pro Kit, Shorty Antenna, 6k HID headlights, 6k HID fogs, LED reverse lights

Interior:

Corbeau LG1's, Corbeau 4 point harnesses, Dual Gauge Pillar Pod, AutoMeter Lunar Series Boost Gauge, AutoMeter Lunar Series Fuel Pressure Gauge, Pioneer double din, Full Focal Audio Sound System, Style Bar, Cobra floor matts

[02JEEPX]

Very nice ride!

[02JEEPX]

I wish I had time to share the whole story...but here is my nomination....
Michael Yount

1982 Volvo 242
It made the WTF?  (Where's The Fun?) section of Jun/14 CarCraft - and GrassRootsMotorsports has been featuring a shot of it on their rolling home page shots.  3 pics attached.....it's running better than ever 14 years later!  Bio below...

2nd owner; an "Augusta" car after having spent it's 1st 4 years in Germany; 202k miles on the chassis; about 100k on the shortblock; 1992 5.0L Mustang stock shortblock; AFR165 heads; 1.7 roller rockers; Buddy Rawls custom cam; welded/ported Explorer intake; 65mm throttle body; 75mm PMAS maf; 24 # injectors; DW300 in-tank fuel pump; -6AN fuel lines; FRPP 1.625" shorties; 2.5" dual w/H-pipe; "custom" 2012 5.0L Mustang mufflers; Tremec T5z; Ford 8.8" w/Truetrac  LSD 3.55 gears; 17x8 Voxx wheels; 235/45/17 Conti ExtremeContact DW; Kaplehenke strut bar, adjustable spring perches and caster/camber plates; Koni Sports; Eibach springs; IPD sway; poly bushings; 2980 lbs. with 1/8 tank of fuel.

video of new exhaust sound: http://s937.photobucket.com/user/MichaelYount/media/Exhaust%20system%20Change/ExhaustVideo_zps677a8aca.mp4.html

[Hemicota]

Submit tonight before midnight! Two very nice rides so far.

[mustangjoe88]

Figured i would give this a try. My name is Joe Augeri and I live in North Augusta.   Here is my 2013 Mustang V6 with the pony package. 

Mods include the following:

Ford Racing 4.10 gears
Steeda heavy duty upper strut mounts
SR Performance lowering spring
Steeda bump steer kit
SR strut tower brace
Steeda real aluminum control arms
J&M steel adjustable panhard bar
Tuned by Jon Lund of Lund Racing
JLT CAI
Roush axleback exhaust
Resonators from a 5.0




 

[mustangjoe88]

Another pic...

[Michael Yount]

Refreshing to see someone playing with the V6 Joe....

[onempty]

That is a great looking V6.