Web design and SEO optimization in Augusta GA

Author Topic: 3M Crystalline B&A  (Read 20630 times)

0 Members and 1 Guest are viewing this topic.

« on: June 27, 2014, 12:13:45 PM »


  • Newbie
  • *
  • Posts: 11
3M Crystalline B&A
« on: June 27, 2014, 12:13:45 PM »
Well I finally did my first mod on the Jetta.  After doing some research on Tint I decided on the 3M Crystalline to cut down on the heat here in the south.  My first 30 secs in the car I turned over to the temperature gauge and it read 100.  So figured a good test.  Usually when it gets in the 80s or 90s I have to crank the A/C up to 3 or 4 just to stay somewhat cool.  Well it was 100 out and I had the fan on 1 and would have to turn it off every little while to keep from freezing.  So far seems to work.  Great install and looks great got it done by Tint Masters in Evans, GA.  Drove an hour to get it done and well worth it.  Now for the pics since that is what everyone came for:







The Heat:

«Reply #1 on: July 01, 2014, 10:27:21 AM »


  • Jason Berry
  • Administrator
  • *
  • Posts: 357
    • http://www.fivewebstars.com
Re: 3M Crystalline B&A
« Reply #1 on: July 01, 2014, 10:27:21 AM »
Right on Brotha! 200+ layers of technology in that film. The BTU numbers don't lie. It does what it says it will do. (Block Heat)

Now what's next on the mod list?
1991 Mustang GT Convertible
2008 Dodge Hemi Quad Cab


CSRA Motorsports


Find us on the web:Find us on Google+Find us on Facebook!Find us on Twitter!